|

Category: Network Management

Man using binoculars beneath the word “VISIBILITY”

Visibility Isn’t the Same as Value: What Happens After You Can See Your OT Network

I worked on a smart hospital project recently where a single meter was flooding a BACnet MS/TP segment with broadcast...

Read More >

How to Handshake, EP. 9: BMS & BACnet Trivia

Welcome back to How to Handshake, Optigo Networks’ podcast series on OT networking, building automation, and the conversations that actually move...

Read More >

Hand selecting target amid tangled lines and arrows

Data Governance for Smart Buildings: Why Ownership Isn’t Enough

The installed base of IoT devices in commercial buildings grew from 1.55 billion in 2022 to just under 2 billion...

Read More >

Manhattan skyline along Hudson River under blue sky

Optigo’s Guide to OT Network Monitoring for Multi-Site Portfolios

At Dartmouth College, eight devices were quietly responsible for more than half of all the BACnet traffic on the network....

Read More >

Promotional banner for OT Networking series with speakers

How to Handshake, Ep. 8 – Livin’ on the Edge

Welcome back to How to Handshake, Optigo Networks’ podcast series on OT networking, building automation, and the conversations that actually...

Read More >

Cell tower beside blurred green leaves under blue sky

Do You Need to Migrate from MS/TP to BACnet/IP?

Somewhere in your building there is a length of twisted pair with a dozen controllers hanging off it, and it’s...

Read More >

Woman with red nails making a quiet gesture

What Is FDD (Fault Detection and Diagnostics)? Why a Degraded OT Network Makes It Go Quiet

Key Takeaways What Is FDD? Fault detection and diagnostics (FDD) is a software layer above your building automation system that...

Read More >

Back to the Future time circuit display panel

OT Networking Trends 2026: What Actually Caught On

Last year, we ran down 9 OT networking trends that carried the potential to reshape how smart buildings operate. This...

Read More >

How to Handshake, Ep. 7: Air Gaps and Other Lies.

Welcome back to How to Handshake, Optigo Networks’ podcast series on OT networking, building automation, and the conversations that actually...

Read More >

Hiker standing on narrow mountain ridge trail

Edge Computing in OT Networks: What Building Automation Teams Should Actually Expect in 2026

The pitch for edge computing sounds made for building automation. Process data near where it’s generated. Reduce cloud round-trips. Keep...

Read More >

Man pointing at framed green artwork on wall

How to Evaluate Smart Building Monitoring Software

Key Takeaways: Why Smart Building Teams Need Purpose-Built Network Monitoring Managing a portfolio of smart buildings means dealing with thousands...

Read More >

Orange and red tomato side by side

7 Best OT Network Monitoring Tools for 2026

TL;DR: The best OT network monitoring tool for smart buildings depends on what you are troubleshooting. For BACnet and building...

Read More >

Technician monitoring industrial automation system on tablet

What Is a Cyber-Physical System? OT Networks Explained

Learn what cyber-physical systems really mean, how OT networks relate, and why network health is the foundation of any CPS...

Read More >

Cracked ground surface with deep central fissure

OT Network Readiness: The Prerequisite for FDD & Analytics

Fault detection and diagnostics only works if you create the best conditions for it to capture, analyze, and diagnose your...

Read More >

How to Handshake, Ep. 4: When IT and OT have to Work Together

In episode 4 of How to Handshake, learn about the challenges and solutions in IT and OT collaboration and security...

Read More >

Leading the Charge: Navigating the IT/OT Convergence

IT and OT collaboration is the bottleneck in building automation — not the technology. Here's how leadership and team structure...

Read More >

How to Handshake, Ep. 3: Is BACnet/SC the next step in OT networking?

Join us in How to Handshake Episode 3 as we explore BACnet Secure Connect with expert Nate Benes and its...

Read More >

EllisDon: The One Number That Ends BACnet Blame Games

See how EllisDon uses a network health score to end multi-vendor blame games — one number that closes disputes in...

Read More >

How to Handshake, Ep. 2: Life after commissioning.

Dive into How to Handshake Episode 2 where we investigate the real work in building automation after commissioning teams leave....

Read More >

What is a Digital Twin and What Does It Mean for Your Building?

Learn what a BACnet digital twin can realistically deliver for your building—and why OT network health determines whether it works....

Read More >

Media Release: Optigo Networks’ Traffic Capture Debuts in Neeve App Marketplace

Explore the integration of Optigo Capture in Neeve for advanced BACnet monitoring and instant deployment for building automation....

Read More >

How to Handshake, Ep. 1: The drive for energy savings starts with OT networks

Join us for How to Handshake Episode 1 where industry experts discuss energy efficiency and the evolving OT landscape....

Read More >

When the BMS Looks Fine but the Building Isn’t

Find out how the BACnet router bottleneck caused discomfort for thousands and the troubleshooting struggles that followed....

Read More >

The Optigo Playbook: 10 Proven Tips for BACnet/IP Network Design and Performance

OT best practices from Optigo's engineers — MS/TP tuning, COV thresholds, router capacity, VLAN segmentation, and continuous monitoring....

Read More >